Technical Data Sheet
Type 410 is a basic hardenable martensitic stainless steel and is well suited for use in highly stressed parts where properties such as corrosion resistance, good strength and ductility are required. 410 is used for steam / gas turbine blades and buckets, bushings, valve components, fasteners, nuclear reactor control rod mechanisms, petrochemical equipment and machine parts.
Resisitance to oxidation and corrosion – Alloy 410 exhibits good corrosion resistance to atmospheric corrosion, potable water, food acids and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects the surfaces from further attack.
| Chemical Composition Limits | |||||||
| Weight% | C | Si | Mn | P | S | Cr | Fe |
| Alloy 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5-13.5 | Bal |
Typical Mechanical Properties
| Material | Tempering Temp °C (°F) |
0.2 % Yield Strength (Mpa) | Ultimate Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Charpy V Notch Impact Strength (J) | Hardness Brinell |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
260 (500) | 1089 | 1331 | 17 | 62 | 76 | 401 |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
317 (700) | 1069 | 1296 | 17 | 60 | 66 | 401 |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
482 (900) | 1014 | 1303 | 18 | 58 | 38 | 401 |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
538 (1000) | 917 | 965 | 19 | 62 | 33 | 285 |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
593 (1100) | 724 | 827 | 20 | 63 | 52 | 248 |
| Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
649 (1200) | 634 | 731 | 21 | 65 | 119 | 223 |
Availability
Type 410 Stainless Steel is available in Sheet, Plate, Strip, Wire, Billet, Forging Stock, Bar (Round, Flats, Squares, Hex). View Stock List, Plate Stock List or contact Sales for further availability.
Specifications
Type 410 Stainless Steel is covered by the following specifications:
AMS 5504 Sheet / strip / plate
AMS 5505 Sheet / strip / plate (Mod)
AMS 5591 Seamless tube
AMS 5609 Bars / wire
AMS 5611 Bars / wire / forging
AMS 5612 (51410 Modified) Bar, Wire, Forgings, Tubing and Rings
AMS 5613 Bars / wire / forging
AMS 5614 Bars / wire / forging
QQ-S-763
QQ-S-766
ASTM A176 / ASME SA176
ASTM A240 / ASME SA240
ASTM A276 / ASME SA276
ASTM A479 / ASME A479
ASTM A493 / ASME SA493
ASTM A580 / ASME SA580
ASTM F899
UNS S41000