UNS S30400

HuaNickel UNS S30400 is used as a building material up to 1500°F. Slight zooming starts at about 1200°F. UNS S30400 has a minimum carbon content of 0.04% and a particle size of ASTM 7 or coarse. It has general corrosion resistance similar to mild steel HuaNickel UNS S30400. However, there is carbide precipitation in the heat-affected zone (HAZ) of the weld. Weldments may be susceptible to HAZ intergranular corrosion and polysulfuric acid stress corrosion cracking in oxidizing acid environments. Carbide precipitation is harmless to high temperature mechanical properties. UNS S3040022Cr 11Ni filler wire (ER308) or overlay electrode (E308) for welding. Most hot jobs do not require post-weld heat treatment.

UNS S30400Chemical composition：

	Cr	Ni	C	Mn	Si	P	S	Fe
Min	18	8	0.04	–	–	–	–	Bal
Max	20	10.5	0.08	2	0.75	0.04	0.03

UNS S30400Physical properties：

Density	Melting point	Resistivity
0.285 lb/in3	2550 – 2590°F	28.3 micro ohm- in

UNS S30400Mechanical properties：

	least	typical
Ultimate tensile strength, ksi	75	90
0.2% yield strength, KSI 30 40	30	40
Elongation, %	40	60

UNS S30400Stainless steel characteristics：

High temperature service is raised to 1500°F

Corrosion resistance, similar to HuaNickel UNS S30400/UNS S30400L

UNS S30400Uses of stainless steel：

Pressure vessels

Petrochemical equipment

Relevant standards：

ASTM: A 240 ASME: SA-240 AMS: 5513