UNS N10002

HuaNickel UNS N10002corrosion resistant alloy is a nickel-based alloy that is mainly composed of elements such as nickel, molybdenum, chromium, iron, etc. It has excellent corrosion resistance and high temperature strength, and is suitable for corrosive environments in acidic and alkaline environments. In addition, UNS N10002alloy has low permeability and good thermal expansion properties, so it is widely used in the aerospace, petrochemical and nuclear industries.

UNS N10002Chemical composition：

	Ni	Cr	Mo	W	Fe	C	Si	Mn	P	S	V
Min	Bal	14.5	15	3	4	≤
Max		16.5	17	4	7	0.08	1	1	0.04	0.003	0.35

UNS N10002Physical properties：

Density	Resistivity/μΩ·m(25℃)		Melting point/℃		Coefficient of linear expansion/×10-6·℃-1
					15～200℃		15～300℃		15～500℃		15～700℃
8.94	1.30		1350		12.0		12.3		12.6		13.2
Elastic modulus/MPa				Thermal conductivity/W·(m·K)-1						Specific heat capacity/×103J · (kg·K)-1
28℃	200℃	400℃		25℃	200℃	300℃		400℃
210000	205000	193000		29.3				—-		0.385

UNS N10002Mechanical properties：

Specimen status	Test temperature/℃	σb/MPa	σp0.2/MPa	δ/%	p/%
Forging, 1200°C water cooling	room temperature	900		43.4	52.9
0.5mm strip, 1200°C water cooling after 5%~10% flattening	room temperature	1076～1167	696～735	33～38
Forging, 1200°C water cooling	550	743		59.2	57.8
Forging, 1200°C water cooling	650	654		53.0	44.5
Forging, 1200°C water cooling	900	313		80.2	55.4
Forging, 1200°C water cooling	1000	178		53.2	52.3
Forging, 1200°C water cooling	1050			54.9	57.3
Forging, 1200°C water cooling	1100	89.2		71.9	56.3
Forging, 1200°C water cooling	1150			66.6	53.5
Forging, 1200°C water cooling	1200	47.1		86.6	57.0

UNS N10002Alloy properties：

In sulphuric acid: HuaNickel UNS N10002alloy has good corrosion resistance (≤ 0.025 mm/a) in various concentrations of H₂SO₄ at room temperature, and air filling has no effect on its corrosion resistance.

Media	Corrosion rate/mm·a-1
	at room temperature	170～310℃	boiling temperature
99%H₂SO₄ :liquid phase Gas phase	0.013 ——	0.725 一	2.025 5.80
75%H₂SO₄+25%SO₃ :liquid phase Gas phase	0.0075	0.650	1.80 1.25

UNS N10002Uses of alloys：

HuaNickel UNS N10002alloys can be made into plates, rods, strips, wires, welded pipes and castings. It can also manufacture various containers, pipes, valves, towers, tanks, etc. that are resistant to the corrosion of these media.

UNS N10002Process performance：

Welding process: HuaNickel UNS N10002alloy has good welding performance, it can be welded by various general welding methods, such as TIG, MIG, arc welding, resistance welding, etc., without special difficulties. The wire filler and core used in welding are generally the same as those used in the base metal.

Heat treatment: Appropriate heat treatment is an indispensable link to make UNS N10002alloy obtain good corrosion resistance, especially intergranular corrosion resistance. Tests have shown that in order for UNS N10002alloy to have good corrosion resistance, plasticity and toughness, quenching after heating at about 1218°C is required, both after welding and after hot forming. However, for castings, it is recommended to quench or air cool after heating at 1177°C.

Relevant standards：

GB/T 15007-2017