SHOMAC
SHOMAC Chemical composition:
Cr | Mo | C | Si | Mn | N | |
Min | 29 | 1.8 | ≤ | |||
Max | 31 | 2.2 | 0.01 | 0.2 | 0.1 | 0.012 |
SHOMACPhysical properties:
Density
p /g·cm-3 |
Linear expansion coefficientg/℃-1 (20~100℃) | Thermal conductivityA/
W·(m·K)-1100℃ |
Specific heat capacityc
/J·(kg·℃)-1 |
Resistivity/μΩ ·cm
(20℃) |
7.6 | 9.85×10~6 | 17.9 | 0.46×10~6 | 64 |
SHOMACMechanical properties:
Materials and Condition | Plate and tube specifications | σp0.2/MPa | σb/MPa | δ/% | ψ/% | Hardness
(HV) |
高纯Cr30Mo2
Annealed state(900℃× 10~15min,Water) |
Hot rolled plate8mm | 329~588 | 529~676 | 21~22 | 66~70 | 190~280 |
Cold-rolled plate3mm | 392~894 | 539~863 | 32 | 53~72 | 180~300 | |
After the cold-rolled plate is welded | 392~412 | 539~559 | ||||
00Cr30Mo2TiNb Annealed state | Cold-rolled plate1.5mm | 431 | 568 | 28 | 192 | |
Pipe wall thickness2mm | 560 | 610 | 37 | 205 |
SHOMACAlloy properties:
High-purity HuaNickel Cr30Mo2 is a typical high-chromium-molybdenum ferritic stainless steel, their microstructure is a pure ferrite structure with body-centered cube, and there are α’ phases and σ(x) intermetallic phases and carbon and nitride phases on the matrix during aging.
SHOMACUses of alloys:
It can be used as a heat exchange equipment for cooling agent in water medium (including seawater) containing Cl-; It can be used for evaporators in the diaphragm alkali production process, acetic acid, urea-resistant devices and components, roofs (including eaves), curtain walls, and various decorative materials for large coastal buildings (airports, restaurants, large landmark buildings, etc.).
SHOMACProcess performance:
Welding process: high-purity HuaNickel Cr30Mo2 has good weldability, no intergranular corrosion tendency after welding, and there is no obvious difference in corrosion resistance before and after welding in some corrosive media.
Heat treatment: The heat treatment process of high-purity Cr30Mo2 steel is 900~1050°C heating, heat preservation and quenching.
Relevant standards:
GB/T 1220-1992