GH132

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.43 MB]

HuaNickel GH132 is a precipitation-hardening deformed superalloy composed of Fe-Ni-Cr and other elements, which has good high and low temperature strength and long-term stability, good corrosion resistance and thermal deformation performance, and has good processing plasticity and satisfactory welding performance.

GH132 Chemical composition:

Ni Cr Mo B P Al Ti C Mn Si V S   Fe
Min 24 13.5 1 0.001 1.75 1 0.1  Bal
Max 27 16 1.5 0.01 0.03 0.4 2.35 0.08 2 1 0.5 0.02

GH132 Physical properties:

Density 7.93g/cm³
Melting point 1364℃~1424℃

Resistivity

θ/℃ 100 200 300 400 500
α/[W/(m·℃)] 14.2 15.9 17.2 18.8 20.5
θ/℃ 600 700 800 900
α/[W/(m·℃)] 22.2 23.9 25.5 27.6

Thermal conductivity

θ/℃ 100 200 300 400 500
α/[W/(m·℃)] 14.2 15.9 17.2 18.8 20.5
θ/℃ 600 700 800 900
a/[W/(m·℃)] 22.2 23.9 25.5 27.6

GH132 Mechanical properties:

Standard number Variety Heat treatment θ/℃ Tensile properties  

HBS

Combined long-lasting performance
σb/MPa σp0.2/MPa δ₅/% ψ/% σ/MPa τ/h τh/h
Q/3B4071 Hot rolled rods Standard heat treatment 20 ≥1035 ≥690 ≥18 ≥30 352~277
650 448 ≥25 >t

GH132 Alloy properties:

After long-term aging at 650°C, G phase and cellular η phase were precipitated at the grain boundary, and the η phase showed Wechsler microstructure after 6000 h. When the alloy composition exceeds the specifications of the technical standard or some process is not in order, an excess of η, G and o phases can occur, and an abnormal cellular γ phase appears.

GH132 Uses of alloys:

HuaNickel GH132 alloy has been used in the manufacture of fasteners for aviation and aerospace engines.

GH132 Process performance:

Welding process: The alloy has satisfactory welding performance, and can be welded by argon arc welding, spot welding, and seam welding. The alloy is welded in a solution state, and the aging treatment is carried out after welding. The strength coefficient of the TIG welding butt sonotre with aging treatment after welding is greater than 90%.

Relevant standards:

GB/T14992、GB/T 14994、GB/T 14995、GB/T 14996 、GJB 2611A 、GJB 2612A、GJB 3020A、GJB3165A、GJB3167A、GJB  3317A、GJB 3782A 、GJB 5280、GJB 5301、HB/Z140 、YB/T  5245 、YB/T 5249、Q/5B4026、Q/3B4071

Detail datasheet