AL-6XN

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.41 MB]

HuaNickel AL-6XN is a super austenitic stainless steel known for its superior resistance to chloride pitting and crevice corrosion. This stainless steel performs well in a variety of corrosive environments, especially seawater and other chlorine-containing media, making it widely used in marine engineering, chemical equipment, food processing, and more.

AL-6XN Chemical composition:

  Ni Mo Cr N C Si Mn Cu S P
Min 23.5 6 20 0.18
Max 25.5 7 22 0.25 0.03 0.1 2 0.75 0.03 0.04

AL-6XN Physical properties:

Density/g·cm-3 Coefficient of thermal expansion/℃×10-6 Specific heat capacity/J·(kg·K)-1 Magnetic permeability/Oe(Oerst) Young’s modulus of elasticity/GPa
8.06 100℃ 500℃ 461 1.003 195
15.3 17.2

AL-6XN Mechanical properties:

σb/MPa σp0.2/MPa δ/% Hardness  ( H R B )
≥690 ≥310 ≥30 <240

AL-6XN Alloy properties:

The solid solution state of super austenitic stainless steel of this composition has a single austenite, and there is no intermetallic phase, but if it is ≥ to 540 °C, there will be carbon, nitride and σ phase precipitation, for which the amount of chromium and molybdenum is at the upper limit of chemical composition will be more sensitive.

AL-6XN Uses of alloys:

thin-walled tubes for seawater condensers; At the same time, it can also be used for important equipment and pipelines resistant to chloride local corrosion in paper and thermal power plants, FGD and offshore oil production platforms.

AL-6XN Process performance:

Welding process: HuaNickel AL-6XN has good welding performance, and can be welded by the general process method of austenitic stainless steel. Since this steel is mostly used as a tube for heat exchangers, automatic welding or manual welding is recommended for the welding of pipes and tube sheets.

Heat treatment: HuaNickel AL-6XN composition upper and lower limit test, short-term heating at 1065 °C can make the σ in AL-6XN steel containing 22% Cr, 7% Mo soluble in the matrix. The solution treatment temperature of this steel is 1065~1105 °C.

Relevant standards:

ASTM B 564-2004

Detail datasheet