0Ni65Mo28Fe5V
HuaNickel 0Ni65Mo28Fe5V It is mainly composed of nickel, chromium, iron and other elements, which give it excellent corrosion resistance. Nickel is one of the main components of 0Ni65Mo28Fe5V alloy, which can improve the toughness and corrosion resistance of the alloy. Chromium increases the oxidation resistance of the alloy and makes it stable at high temperatures and oxidizing environments
0Ni65Mo28Fe5V Chemical composition：
| Ni | Mo | C | Si | Mn | Cr | Fe | |
| Min | Bal | 26 | ≤ | ||||
| Max | 33 | 0.05 | 1 | 1 | 1 | 6 | |
0Ni65Mo28Fe5VPhysical properties：
| Relative density | Melting point/℃ | Resistivity/μΩ·m(20℃) | Linearexpansioncoefficient/10~5m·(m·K)-1 | ||
| 20～100℃ | 20～200℃ | 20～300℃ | |||
| 9.24 | 1320～1350 | 1.35 | 11.2 | 11.4 | 11.5 |
0Ni65Mo28Fe5VMechanical properties：
| Species | Mechanical performance | |||
| σb/MPa | σp0.2/MPa | δ/% | Hardness(HRB) | |
| Bar, 30mm, solid solution | 871.22 | 382.2 | 45.0 | 95 |
| Plate, 3mm, solid solution | 902.6 | 388.0 | 60.0 | 92 |
| Strip, 0.5mm, solid solution | 1000.6 | —— | 37.0 | 212HV |
| Thin strip, 0.25mm, cold-rolled | 1774.0 | 9.2 | ||
0Ni65Mo28Fe5VAlloy properties
The solid solution treatment state of this alloy is a supersaturated solid solution, and there will be intermetallic phases such as Ni₄Mo(β), Ni₃Mo(y), carbides such as Mo₆C and M₂C precipitated on the matrix and along the grain boundaries at medium temperature, which will have an adverse effect on the properties of this alloy.
0Ni65Mo28Fe5VUses of alloys：
HuaNickel 0Ni65Mo28Fe5V alloy can produce plates, tubes (welded pipes), wires, strips, forgings and castings. The main use is resistance to hydrochloric acid corrosion. At the same time, the performance of moisture resistance HCl gas, sulfuric acid and phosphoric acid resistance is also very good. Therefore, 0Ni65Mo28Fe5V alloy is mostly used in the manufacture of containers and linings, pipelines, tower grooves, pumps, valves, etc. that are resistant to the above media. In addition, the cathode material for the manufacture of electron tubes made of ultra-thin strip and ultra-fine wire of 0Mo28Ni65Fe alloy has also achieved satisfactory results.
0Ni65Mo28Fe5VProcess performance：
Welding process: 0Ni65Mo28Fe5V alloy has good weldability, which is similar to general austenitic stainless steel, and can be welded by common methods in industry, such as TIG, MIG, manual arc welding, resistance welding, etc.
Heat treatment: Whether it is a deformed material or a casting, the use state of 0Ni65Mo28Fe5V alloy is generally a solid solution. Because at this time, the alloy has the best corrosion resistance, strong and toughness of the good combination.
Relevant standards：
UNS N10001、0Ni65Mo28Fe5V/、NS3201