NIMONIC® alloy 105
USA SMC SMC-081, NIMONIC® alloy 105 Superalloys NIMONIC® alloy 105 and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Class | Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Superalloys | NIMONIC® alloy 105 | SMC | USA | NIMONIC® alloy 105 |
Chemical composition(mass fraction)(wt.%) of the NIMONIC® alloy 105
| C | Si | Cu | Fe | Mn | Cr | Ti | Al | Co | Mo | Pb | S | B | Zr | Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.17 | ≤1.00 | ≤0.20 | ≤1.00 | ≤1.00 | 14.00 -15.70 | 0.90 -1.50 | 4.50 -4.90 | 18.00 -22.00 | 4.50 -5.50 | ≤0.0015 | ≤0.0100 | 0.0030 -0.0100 | ≤0.1500 | ≤Balance |
Mechanical Properties of steel grade NIMONIC® alloy 105
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 676 (≥) | 326 (≥) | 31 | 43 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 |
Physical Properties of steel grade NIMONIC® alloy 105
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 31 | – | – | 0.42 | – | |||
| 525 | 548 | – | 21.3 | 323 | – | ||
| 645 | – | 22 | 24.2 | 122 | 224 |
Heat Treatment of steel grade NIMONIC® alloy 105
Heat treated : 1681°C – 1921°C
Technological Curves of steel grade NIMONIC® alloy 105
No Curve