Martensite 616
China CNS Martensite 616 China Taiwan Heat-Resistant Steel and Martensite 616 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Heat-Resistant Steel | Martensite 616 | CNS | China | China Taiwan Heat-Resistant Steel |
Austenitic 35 | |||||
Austenitic 36 | |||||
Austenitic 37 | |||||
Austenitic 38 | |||||
Ferrite 46 | |||||
Martensite 1 | |||||
Martensite 3 | |||||
Martensite 4 | |||||
Martensite 11 | |||||
Martensite 600 |
Chemical composition(mass fraction)(wt.%) of the Martensite 616
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) |
---|---|---|---|---|---|---|---|---|---|
0.20-0.25 | Max 0.50 | 0.50-1.00 | 0.04 | 0.03 | 11.0-13.0 | 0.50-1.00 | 0.75-1.25 | 0.20-0.30 | 0.75-1.25 |
Mechanical Properties of steel grade Martensite 616
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
215 (≥) | 741 (≥) | 43 | 21 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
Physical Properties of steel grade Martensite 616
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
44 | – | – | 0.12 | – | |||
758 | 768 | – | 14.3 | 333 | – | ||
978 | – | 11 | 42.2 | 241 | 313 |
Heat Treatment of steel grade Martensite 616
Heat treated : 1995°C – 1944°C
Technological Curves of steel grade Martensite 616
No Curve
Cross Reference Table (Equivalent Grade) of Martensite 616
Grade | Standard | Country | Application |
---|---|---|---|
Martensite 1 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 3 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 4 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 11 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 600 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 616 | CNS | China | CNS standard heat resistant steel bars(CNS 9608-1998) |
Martensite 1 | CNS | China | China Taiwan Heat-Resistant Steel |
Martensite 3 | CNS | China | China Taiwan Heat-Resistant Steel |
Martensite 4 | CNS | China | China Taiwan Heat-Resistant Steel |
Martensite 11 | CNS | China | China Taiwan Heat-Resistant Steel |
Martensite 600 | CNS | China | China Taiwan Heat-Resistant Steel |
Martensite 616 | CNS | China | China Taiwan Heat-Resistant Steel |
ASTM 616 | ASTM | USA | precipitation hardening |
ASTM 616 | ASTM | USA | precipitation hardening |
STR616 | KS | Korea | KS standard martensite heat resistant steel |
6160H | AS | Australia | Australia Structural steel |
SNCM616 | CNS | China | China Taiwan Structural steel |
ASTM A 565 GR 616 | ASTM | USA | ASTM A 565 GR 616 is available as Bar (Round, Shapes), Billet, Wire, Strip. |