Technical Data Sheet Alloy 46 is a iron-nickel alloy that are intended primarily for sealing to glass in electronic applications. Chemical Composition Limits Weight% Ni Cr Mn Si C Al P S Fe Alloy 46 46.0 0.25 max 0.80 max 0.30 max 0.05 max 0.10 max 0.025 max 0.025 max Bal Availability Alloy 46 is available in Sheet, Strip and …
Technical Data Sheet Chemical Composition Limits Weight% Ni Cr Mn Si C Al Mg P S Fe Alloy 45 46 0.10 max 0.80 max 0.30 max 0.05 max 0.10 max 0.50 max 0.025 max 0.025 max Rem Controlled expansion alloys using compression or eyelet brazed seals Availability Alloy 45 is available in Sheet, Strip and Plate. For all stock availability …
Technical Data Sheet Alloy 42 (Nilo 42) is a nickel-iron controlled-expansion alloy containing 42% nickel. Alloy 42 (Nilo 42) has a low and normally constant coefficient of thermal expansion from room temperature to about 300ºC (570ºF). Alloy 42 (Nilo 42) is used for semiconductor lead frames in integrated circuits, bi-metal thermostat strip, thermostat rods, for ceramic-to-metal seals with alumina ceramics, …
Technical Data Sheet Alloy 36 (NILO 36, INVAR 36) is a Nickel-Iron, low expansion alloy which contains 36% Nickel. Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C). Invar 36 also retains good strength and toughness at cryogenic temperatures. Common applications include tooling for aerospace composites, standards of length, measuring devices, thermostat rods, laser …
Technical Data Sheet Kovar (Alloy K) is a nickel-iron-cobalt controlled-expansion alloy containing 29% nickel. Its coefficient of expansion, which decreases with rising temperature to the inflection point, matches the expansion rate of borosilicate glasses and alumina ceramics. Kovar (Alloy K) is used for glass-to-metal seals in applications requiring high reliability or resistance to thermal shock. Kovar (Alloy K) is used …
Technical Data Sheet WASPALOY is a nickel based age hardenable alloy that possesses high temperature strength while still having a good corrosion resistance, especially to oxidation. WASPALOY can be used at temperatures up to 650°C (1200°F) which is critical rotating applications. WASPALOY is used in gas turbine engine components, missile systems, shafts, spacers, seals, rings, casings, fasteners and many other …
Here is a list of our readily available stock of Alloy MP35N/ MP35N (AMS 5844, AMS 5845, AMS 5758). Other sizes may be available on request. For all stock availability contact Sales. BACK TO MAIN MP35N DATA PAGE Availability Alloy MP35N® is available in Round Bar, Tube, Wire, Sheet and Plate. MP35N – Round *CG – Centerless Ground .270 CG …
Alloy MP35N®/ MP-35N (AMS 5844/AMS 5845/ AMS 5758) – Bar Stock List Read More »
Technical Data Sheet MP35N® is a multi-phase alloy containing Nickel, Cobalt, Chromium and Molybdenum with a unique range of properties – ultra high strength, toughness, biocompatibility and corrosion resistance. It is produced by vacuum induction melting and vacuum arc re-melting (VIM-VAR) and is then strengthened by work hardening and aging, giving hardnesses of up to 55-60 Rockwell C and strength …
Here is a list of our readily available stock of Alloy MP159 (AMS 5841, AMS 5842, AMS 5843). Other sizes may be available on request. For all stock availability contact Sales. BACK TO MAIN MP35N DATA PAGE Availability Alloy MP159 is available in Bar (Round). Other sizes may be available on request. MP – 159 Round * CG – Centerless …
Alloy MP159 (AMS 5841, AMS 5842, AMS 5843) – Bar Stock List Read More »
Technical Data Sheet MP159 is a Nickel-Cobalt based multiphase alloy. This combination of properties enables ultra high strength, toughness, good ductility and excellent corrosion resistance. Through work strengthening and aging MP159 alloy exhibits ultimate tensile strength levels in excess of 1830 MPa. MP159 is used in many different industries from use in prosthetic devices, jet engine components, fasteners, marine applications …
