Alloy MP159 (AMS 5841)


Technical Data Sheet

MP159 is a Nickel-Cobalt based multiphase alloy. This combination of properties enables ultra high strength, toughness, good ductility and excellent corrosion resistance. Through work strengthening and aging MP159 alloy exhibits ultimate tensile strength levels in excess of 1830 MPa. MP159 is used in many different industries from use in prosthetic devices, jet engine components, fasteners, marine applications to petroleum industry applications.

Chemical Composition Limits
Weight % Ni Co Cr Fe Mo Ti Cb Al
MP159 25.5 35.7 19.0 9.0 7.0 3.0 0.6 0.2

Typical Mechanical Properties

Material Condtion Tensile Strength ksi Yield Strength ksi Elongation % Reduction of Area % Hardness HRC
MP159 Annealed 123 58 60 69  
MP159 AMS 5841 160 max 70 max 50 65 20 HRC max
MP159 Annealed, Cold Worked 48% 230 205 12 46  
MP159 AMS 5842

≥38HRC

MP159 Annealed, Cold Worked + Aged 275 265 8 35  
MP159 AMS 5843 260 min 250 min 6 min 20 min ≥44HRC

Availability
Alloy MP159 is available in Bar (Round). For all stock availability contact Sales.

Specifications
UNS R30159

AMS 5841 Bar (Solution Heat Treated)
Solution Heat Treat: 1900°F – 1925°F / 4-8 hours + Water Quench

AMS 5842 Bar (Solution Heat Treated and Work Strengthened)
Solution Heat Treat:
1900°F – 1925°F / 4-8 hours + Water Quench
Followed by work strengthened / strain hardening

AMS 5843 Bar (Solution Heat Treated, Work Strengthened and Aged)
Solution Heat Treat:
1900°F – 1925°F / 4-8 hours + Water Quench
Followed by work strengthened / strain hardening
Ffollowed by ageing: 1200-1250°F 4-4.5 hours + Air Cool.

Leave a Comment

Your email address will not be published. Required fields are marked *