| Alloy |
UNSUnited States |
DIN Germany |
JIS Japan |
GB China |
|
| UNS |
AISI |
Original brand number |
New brand |
|
| 904L |
UNS N08904 |
|
1.4539 |
X1NiCrMoCu25-20-5 |
SUS890L |
00Cr20Ni25Mo4.5Cu |
|
It is an austenitic stainless steel with higher corrosion resistance than SUS 316L and SUS 317L. Due to the addition of Cu (1.5%), it has outstanding corrosion resistance to reducing acids such as sulfuric acid and phosphoric acid, and is widely used in chemical equipment. |
| 254SMO |
UNS S31254 |
254 |
1.4547 |
X1CrNiMoCuN25-18-7 |
SUS312L |
02Cr20Ni18Mo6CuN |
|
It is a highly corrosion-resistant austenitic stainless steel with high Ni, high Cr, and high Mo. It also has strong corrosion resistance in harsh environments such as high-temperature seawater. Under some conditions, it has the same characteristics as Hastelloy’s®It has corrosion resistance comparable to alloy and pure titanium, and is an economical stainless steel. |
| 926 |
UNS N08926 |
8926 |
1.4529 |
X1NiCrMoCuN25-20-7 |
— |
— |
— |
It is a highly corrosion-resistant austenitic stainless steel with high Cr and high Mo. It also has strong corrosion resistance in harsh environments such as high-temperature seawater or flue gas desulfurization equipment. Under some conditions, it has the same characteristics as Hastelloy’s® It has corrosion resistance comparable to alloy and pure titanium, and is a highly economical stainless steel. |
| AL-6XN |
UNS N08367 |
8367 |
|
|
|
|
|
It is a highly corrosion-resistant austenitic stainless steel with high Cr and high Mo. It also has strong corrosion resistance in harsh environments such as high-temperature seawater or flue gas desulfurization equipment. Under some conditions, it has the same characteristics as Hastelloy’s® It has corrosion resistance comparable to alloy and pure titanium, and is a highly economical stainless steel. |
| 654SMO |
UNS S32654 |
|
1.4652 |
X1CrNiMoCuN24-22-8 |
— |
— |
— |
|
| Nitronic50 |
UNS S20910 |
XM-19 |
|
|
|
|
|
Offers a unique combination of corrosion resistance and strength not found in any other commercial material. The corrosion resistance of austenitic stainless steel is better than that of alloys 316, 316L, 317, and 317L, and its yield strength at room temperature is approximately twice that of these alloys. It has excellent mechanical properties at both high and sub-zero temperatures, which is what makes it different from most austenitic stainless steels. It is also not magnetic at low temperatures. The yield strength of High Strength (HS) Nitronic 50 is approximately 3 times that of 316 stainless steel. Widely used in marine, nuclear power, chemical and oil and gas industries. |
|
|
|
1.4565 |
X2CrNiMnMoN25-18-6-5 |
|
|
|
|
| Nitronic60 |
UNS S21800 |
218 |
|
|
|
|
|
Nitronic 60 stainless steel offers corrosion and wear resistance at a significantly lower cost than alloys containing cobalt and high nickel. Its overall corrosion resistance is better than Type 304 in most media. In Nitronic 60, resistance to chloride pitting is better than in Type 316. The yield strength at room temperature is almost twice that of 304 and 316. Nitronic 60 has excellent resistance to high temperature oxidation and low temperature impact. Widely used in the power, chemical, petrochemical, food and oil and gas industries, including expansion joint wear plates, wear-resistant pump rings, bushings, process valve stems, seals and logging equipment |
| 310L |
UNS S31002 |
UNS S31002 |
1.4335 |
X1CrNi25-21 |
|
|
|
|
| 316LMod |
|
724L |
1.4435Mod |
|
— |
|
|
|
| 310LMod |
UNS S31050 |
725LN |
1.4466 |
X1CrNiMoN25-22-2 |
— |
03Cr25Ni22Mo3N |
|
|
| C4 |
|
|
|
|
|
|
|
|
