UNS S32707
UNS S32707 Chemical composition:
Cr | Ni | Mo | N | C | Mn | Si | S | P | |
Min | 26 | 5.5 | 4 | 0.3 | ≤ | ||||
Max | 29 | 9.5 | 5 | 0.5 | 0.03 | 1.5 | 1 | 0.02 | 0.035 |
UNS S32707 Physical properties:
Density | 7.8g/cm³ |
UNS S32707 Mechanical properties:
Heat
treatment |
Tensile strengthσb/MPa | Yield point δ₅/% | Elongation after break % | Hardness HBW |
anneal | ≥9.5 | ≥5 | ≥0.5 | ≤318 |
UNS S32707 Alloy properties:
The structural characteristics of UNS S32707 steel are not significantly different from those of super duplex stainless steels such as 2507.
UNS S32707 Uses of alloys:
HuaNickel UNS S32707 steel has excellent resistance to pitting, crevice corrosion and stress corrosion in chloride environments, and is especially suitable for the manufacture of heat exchanger equipment with seawater and Cl- as the working medium and cooling medium. For example, in the atmospheric distillation unit of the refinery, the overhead heat exchanger tube bundle has been replaced by UNS S32707 and the seawater condenser cooling pipe made by HuaNickel UNS S32707 has achieved satisfactory results.
UNS S32707 Process performance:
Welding process: HuaNickel UNS S32707 has good weldability, and UNS S32707 is mostly used for heat transfer tubes of heat exchangers. The welding of this steel pipe to the tube sheet is recommended to be welded by TIG/GTAW (tungsten inert gas/tungsten inert gas arc welding), and manual welding and TIG automatic welding can also be used
Relevant standards:ASTM A511/A511M-2020、ASTM A789、A79