0Cr13Al
China GBT 0Cr13Al Ferrite and 0Cr13Al Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application |
|---|---|---|---|---|---|
| Steel Grades | Special Steel | 0Cr13Al | GBT | China | Ferrite |
| 26NiCrMoV14-5 / 1.6957 / HW19476 | |||||
| ASTM A 565 GR 616 | |||||
| S42200 | |||||
| 442S19 | |||||
| MIL S 861 | |||||
| AISI 414 | |||||
| 0Cr26Ni5Mo2 | |||||
| 1Cr18Ni11SiA1Ti | |||||
| 00Cr18Ni5Mo3Si2 | |||||
| 1Cr21Ni5Ti |
Chemical composition(mass fraction)(wt.%) of the 0Cr13Al
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Other(%) |
|---|---|---|---|---|---|---|---|
| Max 0.08 | Max 1.00 | Max 1.00 | 0.035 | Max 0.03 | 11.50-14.50 | Max 0.60 | Al 0.10-0.30 |
Mechanical Properties of steel grade 0Cr13Al
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 651 (≥) | 564 (≥) | 44 | 42 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
Physical Properties of steel grade 0Cr13Al
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 31 | – | – | 0.32 | – | |||
| 738 | 917 | – | 44.3 | 221 | – | ||
| 723 | – | 44 | 42.2 | 434 | 241 |
Heat Treatment of steel grade 0Cr13Al
Heat treated : 1261°C – 1751°C
Technological Curves of steel grade 0Cr13Al
No Curve